SETTING THE POWER
To guarantee the operation of the radiator the power of the radiator has to be set.
From Auto, Comfort, Eco or Anti-freeze mode, press and hold the
Operating mode
Navigate through the menu with the button
Select the parameter with the button
the radiator) with the buttons
"End" parameter with the
OPERATION
Display:
1: Operating mode menu (active mode is framed)
2: Program number or parameters
3: Installation parameter menu
4: Room temperature indicator
5: Opened window function
6: Heating demand
7: Temperature unit
8: Measured temperature or set point temperature
9: Display zone for time (12H AM/PM or 24H)
10: Graphic view for the current day program or operating mode indicator
11: Current day of the week
12: Pictogram for comfort/reduced/Auto mode/consumed power
13: Keypad lock function indicator
14: Override function or ITCS function when blinking
Keypad:
POWER ON/STANDBY MODE
With
user access directly the standby mode. After pressing the
temperature is displayed for a certain time. If the
return in the last selected mode.
Time and day setting
5 sec
to select the parameter:
and change to the corresponding power of the radiator (see label on
or
. Validate with the
button and press
.
button is pressed again the thermostat will
button:
5 sec
Power of
radiator
300W
500W
750W
1000W
1250W
1500W
button. To leave the parameter menu, choose
: boost key
: On/Off key
: minus key
: validation key
: plus key
: navigation key
button measured
Parameter setting
Parameter
to set
30
50
75
100
125
125
Standby mode
2