VDO M6.1 Notice D'utilisation Abrégée page 24

Setting the wheel size
SET
– Open the settings menu:
– Scroll from Logging to Settings:
– Open the settings:
– Scroll to wheel size in the menu:
– Start the setting:
TPC BIKE
ALTI
– Press the BIKE or TPC button to
– Confirm your selection:
– Close the settings menu/back to the
Enter the wheel circum- Enter the wheel circum-
ference in mm (kmh) or ference by selecting
inches (mph). a tyre size from the
tyre list.
Manually enter the wheel circumference or select from the tyre list.
Information on tyre sizes can also be found on page 172–173.
46
Press and hold the SET button until the
settings menu opens
Press the BIKE or TPC button
press the SET button
Press the BIKE or TPC button
Press the SET button
select "Manual Set" or the tyre list
Press the SET button
function menu:
Press and hold the SET button
Setting the total values
SET
– Open the settings menu:
– Scroll from Logging to Settings:
– Open the settings menu: press the
– Scroll to Total Values in the menu:
– Open the settings: press the SET button
TPC BIKE
ALTI
– Scroll to the total values in the
– Open the selected setting:
– Change the setting: Press the BIKE or
– Confirm your selection: Press the
– Close the settings menu/back to the
ATTENTION:
battery is replaced.
Press and hold the SET button until the
settings menu opens
Press the BIKE or TPC button
SET button
Press the BIKE or TPC button
settings: Press the BIKE or TPC button
Press the SET button
TPC button
SET button
function menu: press and hold the
SET button
all data is retained when the
47