Guarantee - Clatronic PP 2914 Mode D'emploi & Garantie

Masquer les pouces Voir aussi pour PP 2914:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Pan
GB
Please remove any food residues while they are still warm with a damp cloth
or paper towel. In the case of stubborn residues the pan should be reheated
with a little water.
Wash off the pan with a soft sponge and soapy water. Then wipe with clear
water and dry thoroughly with a soft cloth. After drying please apply a thin fi lm
of edible oil to the surface.
Lid
Clean the lid with a soft sponge and a little washing-up liquid.
Thermostat
Please clean the thermostat with a soft paper towel or a soft try cloth. Never
clean the regulator with damp items, as otherwise this might result in an
electric shock or fi re.
Never immerse the cable loom in water!
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month guarantee star-
ting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *)
ascribable to material or manufacturing defects will be eliminated free of charge
by repairing or, at our discretion, by replacing it. The guarantee services do not
entail an extension of the life of the guarantee nor do they give rise to any right to
a new guarantee!
Proof of the guarantee is provided by the proof of purchase. Without proof of
purchase no free replacement or repair will be carried out.
If you wish to make a claim under the guarantee please return the entire machine
in the original packaging to your dealer together with the receipt.
*) Damage to accessories does not mean automatic free replacement of the who-
le machine. In such cases please contact our hotline. Broken glass or breakage
of plastic parts are always subject to a charge.
Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading
blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.)
42

Guarantee

Publicité

Table des Matières
loading

Table des Matières