Closing The Door - ZANKER KBF11401SK Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
The temperature in the freez-
er is too low.
The temperature in the freez-
er is too high.
There is too much frost.

Closing the door

1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "Installa-
tion".
Possible cause
The door has been opened too fre-
quently.
The product temperature is too high.
The room temperature is too high.
The Fast Freeze function is switched
on.
The temperature regulator is not set
correctly.
The Fast Freeze function is switched
on.
The temperature regulator is not set
correctly.
The door is not closed correctly.
The product temperature is too high.
Many products are stored at the
same time.
Products are too near to each other.
Food is not wrapped correctly.
The door is not closed correctly.
The temperature regulator is not set
correctly.
Do not keep the door open longer than
necessary.
Let the product temperature decrease
to room temperature before storage.
Decrease the room temperature.
Refer to "Fast Freeze function".
Set a higher temperature.
Refer to" Fast Freeze function".
Set a lower temperature.
Refer to "Closing the door".
Let the product temperature decrease
to room temperature before storage.
Store less products at the same time.
Store products so that there is cold air
circulation.
Wrap the food correctly.
Refer to "Closing the door".
Set a higher temperature.
3.
If necessary, replace the defective door gaskets.
Contact the Service Center.
Solution
19

Publicité

Table des Matières
loading

Table des Matières