ECOVACS WINBOT 7 Mode D'emploi page 10

3. Operating the Robot
1 Loop one end of the Safety Tether to End
A on the Robot Power Cord and tighten.
2
Connect End A and End B and tighten.
Loop the other end of the Safety Tether
3
around the Safety Pod's channel and pull it
tight.
If the length of power cord restricts WINBOT 7's movement, a WINBOT Extension Cord can be
*
used. Disconnect End A and End B, and connect them with both ends of the Extension Cord
respectively and tighten.
Only one Extension Cord can be used when WINBOT 7 is cleaning an outside window.
*
8 8
EN