Maintenance, Care, Storage - Gardena 1198 Mode D'emploi

Sélecteur automatique
Masquer les pouces Voir aussi pour 1198:
Table des Matières

Publicité

By deactivating the pro-
A
gramme (Bad Weather
Function), it may be possible
that the watering programmes
no longer agree with the respec-
tive water outlets of the Auto -
matic Water Distributor. There-
fore avoid deactivation of the
programmes or re-assemble
respectively the cor rect se -
quence by turning the dial disc
(after starting opera tion). Only
for use in combina tion with

9. Maintenance, care, storage

The Automatic Water Distributor
is maintenance free, only the dirt
filter (4) has to be cleaned from
time to time. Please store the
Automatic Water Distributor in
a frost-resistant place before the
first frost sets in.
12
the Water Computer 1060 with
"Special Program", activa tion
of this function is possible
without changing the sequence
of the watering programmes.
Please note the advice given in
the operating instructions of
your tool!
Operate the Automatic
A
Water Distributor in con -
nection with the GARDENA
Moisture Sensor only when
linked up to the Watering
We expressly point out – that
in accordance with product
liability law – we are not liable
for damage caused by our
equipment if it is due to im-
proper repair or if parts have
been exchanged not using our
Original GARDENA parts or
parts approved by us and if the
repairs were not carried out
Com puter 1060 with "Special
Pro gram". With tools without
this function, the danger exists
that, the ordering of the pro-
grammes to their specific out -
lets may be altered.
Never press the dial disk
A
during operation.
The individual outlets can
A
be operated one after the
other, i.e. outlet 1, outlet 2 ...
by the GARDENA Technical
Service. The same applies
to supplementary parts and
accessories.
Should you have any further
questions, please contact a
GARDENA Service Centre
(address on the rear).
G

Publicité

Table des Matières
loading

Table des Matières