Publicité
Les langues disponibles
Les langues disponibles
CAUTION : Before using this phone, and, in order to prevent
from potential acoustic shocks all users who are not hearing
impaired, make sure that the "Amplify switch" located under the
phone is on the "MANUAL" position.
See "Amplify switch" section for more details.
Connecting and installing
Plug one end of the twisted cord into the socket provided on the end of the
handset, and the other end to the socket on the left side of the phone.
Connect the straight telephone line cord to the socket at the rear of the
phone and the other end to the telephone outlet. Connect the AC adaptor
to the back of the telephone and to the electrical outlet.
front panel will light to confirm that power is on.
Install batteries
CAUTION : Before opening the battery compartment cover,
disconnect from the line and from the AC adapter to prevent from
potential electrical shock. Use a tool like a small screwdriver or a
pencil to push the battery compartment cover open.
If you wish to save numbers stored into memories and allow some
amplifying in the handset in case of AC power shortage, install 4 AA
batteries (Not included). Make sure to observe the batteries polarity as
displayed on the label of the battery compartment cover.
When using this telephone with battery power, a low battery indicator on
the front panel will light up if the batteries are low.
Open with a tool
(Screwdriver for
instance)
Batteries not included
9
A red led on the
Publicité
