Publicité
Les langues disponibles
Les langues disponibles
mode ; this way, the amplification boost will always be active even
after each hanging up of the handset.
Note : in the speakerphone mode, pressing "
necessary, it is automatically activated, whatever the position of the
amplify switch under the telephone.
BIS/P (LNR REDIAL/PAUSE)
This key allows the last number dialed to be automatically redialed
(maximum capacity is 32 digits).
Pressing this key when dialing enters a timed pause in the dialing
process: this may be useful when storing a number into a memory
key (see "Storing a Telephone number" section).
ATT
When pressing this key during a call, the other party will be put on
hold (with music while on hold). The handset can be hung up and a
red led will light to alert someone is on hold. To resume the
conversation, simply pick up the handset or press "
resume the conversation in the "speakerphone" mode.
One touch memory keys
3 numbers can be stored into the memory keys M1, M2 and M3.
To call a number stored in one of these 3 locations, simply pick up
the handset and press the memory key. Each memory can store up to
16 digits numbers.
Note : disconnecting the phone from the line will erase the numbers
stored into the memory keys.
Storing a new number into a location where one number is already
stored will automatically erase the previous number stored.
To erase a memory without storing a new number, simply follow the
storing process (detailed here after) without entering any number.
13
" key is not
" key again to
Publicité
