Depaepe 18032008 Mode D'emploi page 12

REMINDER :
CAUTION : Before using this phone, and, in
order to prevent from potential acoustic shocks all users who are not
hearing impaired, make sure that the "Amplify switch" located under
the phone is on the "MANUAL" position.
See "Amplify switch" section for more details.
Adjusting Receive volume and Tone
The volume and tone of the speech received through the handset can
be adjusted for a better understanding by hearing impaired people.
Those adjustments can be made using the 2 sliding switches located
on the front panel of the telephone.
To activate those sliding control switches, the " " button must be
pressed; a red led on the front panel will confirm this activation.
-Pick up the handset
-Press " " key (the red led will light)
-Adjust the sliding switches as needed.
Note : if the "amplify switch" located under the telephone is in the
"ON" position, pressing " " key is not necessary.
Amplify switch
When the Amplify switch (located under the base) is in the
"MANUAL" position, the receive speech boost will be canceled at
the end of each conversation, when hanging up the handset.
The "MANUAL" mode is convenient when different users,
hearing impaired or not, use the same HD MAX Ampli
telephone; activating manually this feature, on demand, by
pressing the " " key minimizes potential acoustic shocks.
However, if the HD MAX Ampli should always be used with the
receive boost on, then the Amplify switch should be in the "ON"
12