Product Installation - Fracarro D-MATRIX 4S-FTA Guide Rapide

CONTENTS OF THE PACKAGING:
● D-MATRIX-4S FTA
●
Power cord
Quick guide
●
PRODUCT ASSEMBLY:
● By using the specific fixing points, screw the product to the wall so that it is vertical to allow correct
heat dissipation.
● Connect the earth terminal to the antenna earth line.
● Connect the antenna cables to their inputs.
● If required, insert an external USB drive
● Connect the product to the electricity supply
● Wait for the device to start and it can then be configured.
● Check the output signal is generated correctly and the reception status of the inputs and system on
the specific multicolour leds.
WALL MOUNTING:
Install the unit as shown in the figures, using the brackets incorporated in the product mechanics. Allow
sufficient space to connect the power cable and for correct ventilation (15 cm airspace on all sides). Any
other type of installation could affect the correct functions of the
15 cm
15 cm
15 cm
Correct mounting

PRODUCT INSTALLATION

15 cm
11
device.