Gisowatt INDUSTRIAL 30 Mode D'emploi page 17

C - U S E O F T H E A P P L I A N C E
C1 - USE AS A DRY CLEANER
The cartridge filter element must always be in place.
WARNING:
C2 - USE AS A WET CLEANER
Always remove the cartridge filter element.
Fit the foam filter (if available) (fig. "B6")
WARNING:
C3 - TO CLEAN UP LARGE AMOUNTS OF LIQUID
of liquids from containers.
C4 - AS A BLOWER
======================================================================
D - M A I N T E N A N C E
Always remove the plug from the power supply socket before
doing any maintenance, cleaning or substitution operations of the
filtering system (fig. "003").
For best performance of the appliance, it is important to always keep the
cartridge filter element clean. It is advisable to replace the cartridge after 100
hours of operation.
When the vacuumed liquids reach the maximum level in the drum container,
the suction action is stopped automatically by the safety float and the noise
level of the appliance suddenly increases.
Turn off the appliance and release the motor unit in order to empty the drum
container.
(fig. "C2")
(fig. "C1")
English
003
13