Programmed Play; Cleaning And Maintenance - AEG MC 4443 Mode D'emploi

Press three times = the whole CD is played continuously
(
Press four times = the display contains the word RAND,
MP3 and the track number that is to
be played first. All tracks are played
back in random order.
Press five times = the function is deactivated and the
CD is played in the normal mode.
ALBUM (5/4)
Press this key repeatedly during playback in order to
move up one folder. If this button is pressed in stop
mode the display also appears briefly. Then start playback
with the II PLAY/PAUSE button (6/1).
+10 (5 on the remote control)
Press this button to jump forwards 10 tracks at a time
(provided that there are more than 10 tracks stored on
the CD).

Programmed Play

This can be used to program any desired sequence of
tracks.
1. Press the  STOP key (7/7).
2. Press the PROG key (2 on the remote control). The
word PROG flashes in the display and „P01" (memory
preset) appears. Use the SKIP+ I/I SKIP- but-
tons (13/14/3) to select the desired track and then
press the PROG button again. The display changes to
memory slot P02.

NOTE:
• In the case of CDs in MP3 format, press the AL-
BUM button (5/4) in order to change the folder.
• In the case of CDs in MP3 format that contain
folders, when the device changes to a different
folder 001 appears for the first track of the new
folder.
3. Select the next track with the SKIP+ I/I SKIP-
key and press the PROG key again. Repeat the
procedure until all the desired tracks are selected.
4. Press the II PLAY/PAUSE key (6/1). The playback
starts. The selected track numbers are shown in the
display in the correct order and the symbol  or 
MP3 and PROG light up. Press this button to pause
briefly the playback.
5. Press once the  STOP key to stop the playback while
retaining the program.
6. To play the programme back again, press the II
PLAY/PAUSE button.
7. To delete the program, press the  STOP key twice.
The PROG control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The abbreviation
PROG goes off and the programmed order of tracks is
deleted from the memory.
05-MC 4443 AEG.indd 45
ALL appears in the display).
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the MODE button
(15/6) up to three times and then you can use the func-
tions as described under MODE".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200
tracks can be compressed and stored on these CDs. Your
machine detects an MP3 CD automatically (the total
number of tracks and MP3s appears in the display). If you
would like to play one of these CDs, proceed as described
under „Playing CDs/MP3". Tracks can be programmed as
described under „Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compres-
sion methods, as well as quality differences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
CD jumps during Check the disc
playback. for fingerprints,
dirt or scratches.
The device can- The device is blo-
not be operated. cked, i.e. "stuck".
English
45
Solution
Ensure that the
disc is inserted
with the label
facing upwards.
Check the disc
for fingerprints,
dirt or scratches.
Remove the
mains plug for
approximately
5 seconds. Then
turn the device
on again.
14.09.2010 14:47:24 Uhr