Ironing Tips; Maintenance - Dupray STEAMIRON Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TURNING THE MACHINE OFF
When you are done using your steam generator iron, turn the main dial (1) to the OFF position
and unplug the unit.
STORING YOUR STEAM GENERATOR IRON
It is safe to leave water in the boiler when the steam generator iron is not in use.
If it is for an extended period of time (months), then it is best to flush out the remaining water. To do so,
follow the water removal instructions as outlined in the maintenance of the boiler section on page 10.

IRONING TIPS

WOOL
SILK / NYLON
Set the thermostatic control (C)
This setting should only be
Turn the fabric over and
to the Wool setting and vaporize
used for dry ironing. Turn
iron quickly and lightly
steam on the fabric. Be careful
the thermostatic control (C)
using little steam iron
not to pull the fabric.
to the Silk or Nylon position.
from the right side barely
Gently iron the fabric.
The use of the optional teflon
The use of the optional teflon
soleplate is recommended.
soleplate is recommended.
CAUTION:
Always follow the manufacturer's ironing recommendations for the fabric.
VELVET
DARK COLOR FABRICS
COTTON
Turn the thermostatic control (C)
Set the thermostatic control (C)
to a low temperature setting.
to Cotton. This setting can also
be used to on fabrics requiring
more steam pressure and
touching the fabric.
higher temperature.

MAINTENANCE

CLEANING THE BOILER
To maintain your steam generator in good condition and to ensure constant performance, we recommend
that you periodically clean the boiler
after every 50 hours of use or less depending on the water hardness.
CLEANING INSTRUCTIONS
1.
Before cleaning the boiler, please make sure that the boiler is at room temperature, that it
has not been used for at least 12 hours, and that the steam generator iron is disconnected
from the power source.
2.
Unscrew and remove the boiler cap (2). Turn the steam generator iron over and empty
all the remaining water from the boiler.
3.
Dissolve one package of the provided descaling solution in 0.65L (22 oz) of water or mix
equal parts of water and white vinegar, for a maximum of 0.65L (22 oz). Pour it into
the boiler using the provided funnel and leave the boiler cap open. Let sit overnight.
4.
Drain the boiler and rinse thoroughly with clean water.
5.
Refer to page 7 for instructions on how to refill and turn on the machine.
ATTENTION:
It is not recommended that you use any other chemical to clean this product.
Doing so will automatically void the warranty.
en
10

Publicité

Table des Matières
loading

Produits Connexes pour Dupray STEAMIRON

Table des Matières