Initial Use And Operation - Rommelsbacher WPS 857 Mode D'emploi

Masquer les pouces Voir aussi pour WPS 857:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• For disconnecting the cord from the mains and from the appliance, only use
the plug, never the cord.
• Never immerse appliance, power cord or plug in water for cleaning.
• Do not store the appliance outside or in damp rooms.
• This electrical appliance complies with the relevant safety standards. In case
of signs of damage to the appliance or the power cord, unplug the appliance
immediately. Repairs may be executed by authorised specialist shops only.
Improper repairs may result in considerable dangers for the user.
• Do not at all operate this unit with an external timer or a separate telecon-
trol system.
• Do not use the appliance´s upper side as depositing rack or working top as
it will get hot when operating the appliance! As protection against fire, do
generally not put objects made of paper, plastic, fabric or other inflammab-
le material on hot surfaces.
• Improper use and non-observance of the instruction manual will void warranty.

3. Initial use and operation

Attention: Hot surface!
• The appliance has a high-quality decorative surface. Please take care to put kitchenware
cautiously onto the plate and not to slide it on. Hard china may cause scratches.
• In order to avoid damage make sure to exclusively use the attached power supply cord.
• Connect the plug for the appliance with the warming tray's power inlet.
• Then plug the safety plug into an earthed socket.
• The warming tray reaches its maximum temperature of about 120 °C within approx. 8 minutes.
• The pilot lamp goes out.
• The plug for the appliance can be removed now.
• The appliance is now independent of power supplies and can be used for a great variety of purposes.
The cumulated heat will be stored for up to one hour.
• It is possible to keep the appliance connected to the mains for a longer period of time.
The integrated thermostat also serves as a thermal shut-off to prevent overheating. It switches off
the heating element automatically as soon as the maximum temperature has been reached. When
the temperature drops, the thermostat will start again all by itself and will re-heat the warming tray
to maximum temperature. You can see that the thermostat adjusts itself to maintain the temperature
by the pilot lamp's going on and off.
• Unplug the appliance after usage!
• Kitchenware with a level bottom, which provides good contact to the surface of the warming tray, is
particularly suitable for keeping dishes warm.
• Bottom stand should not be too high since otherwise considerable loss in heat will occur.
• Covering the dishes will increase efficiency of keeping them warm.
7

Publicité

Table des Matières
loading

Table des Matières