Correct Use; Useful Information - IKA T 65 digital ULTRA-TURRAX Mode D'emploi

• Delivery scope
Disperser T 65 basic ULTRA-TURRAX
- Disperser T 65 basic ULTRA-TURRAX
- Three part tool set for dispersion tools
series S 65....
- Rotor wrench
- Hook wrench
- Shaft wrench
- Cable gland for the
stand limit switch cable
- Hexagon L-wrench
DIN 911
- Operating instructions
The connection cable is not included in the scope of supply.
• Use
When used in combination with one of our recommended dis-
persing elements, the drive unit is a high-speed dispersing and
emulsifying unit capable of handling free-flowing and liquid
media in batches.
Production of:
- Emulsions
- Dispersions
- Wet crushing
Operating modes:
- On stand
Dispersion is the dissolution and diffusion of a solid, liquid or
gaseous phase in a liquid that is not consolute with that phase.
T
he rotor/ stator principle
Due to the high rotation speed of the rotor, the medium to be
processed is automatically drawn axially into the dispersion head
and then forced radially through the slots in the rotor/stator ar-
rangement.
The high accelerations acting on the material produce extremely
strong shear and thrust forces. In addition, high turbulence oc-
curs in the shear gap between rotor and stator, which provides
optimum mixing of the suspension.
The dispersion effectiveness is heavily dependent on the product
of the shear gradient and the time the particles spend in the
shear zone. The optimum range for the circumferential velocity
of the rotor/stator arrangement is 10 to 24 m/s.
Disperser T 65 digital ULTRA-TURRAX
®
- Disperser T 65 digital ULTRA-TURRAX
®
- Three part tool set for dispersion tools
series S 65....
- Rotor wrench
- Hook wrench
- Shaft wrench
- Cable gland for the
stand limit switch cable
- Hexagon L-wrench
- Operating instructions
The connection cable is not included in the scope of supply.

Correct use

• Range of use
The safety of the user cannot be guaranteed if the appliance is
operated with accessories that are not supplied or recommended
by the manufacturer or if the appliance is operated improperly
contrary to the manufacturer's specifications or if the appliance
or the printed circuit board are modified by third parties.
The unit is suitable for use in all areas apart from domestic areas
and areas directly connected to a low-voltage supply which also
serves domestic areas.

Useful information

A processing time of a few minutes is usually sufficient to pro-
duce the desired fineness. Long processing times bring only in-
significant improvements in the obtainable fineness; the energy
expended serves merely to increase the temperature of the me-
dium.
DIN 911
- Laboratories
- Small-scale production
®
®
- Technical colleges
Fig. 1
16