Dutchblue 5026-B Mode D'emploi page 8

Step 4:
Find the motor wire under the chair base.
Connect the adaptor to the motor wiring and then connect the plug wiring to the adaptor.
Take the hand control out from the side pocket of the seat.
Once the chair is assembled according to the Assembly instructions, place the chair on a flat
surface in a dry room. The chair is now ready for use.
Note: Make sure all the wires are properly connected, if not the chair will not function properly.
If the external transformer or hand control is damaged, immediately place it in a plastic bag
and call your authorized dealer for instructions.
Electromagnetic and Radio Frequency Interference (EMI/RFI).
According to the EMC standards, this lift chair is suitable for use in all establishments including
domestic establishments and those directly connected to the public low-voltage power supply
network that supplies buildings used for domestic purposes. This product has passed immunity
testing.
(1) Connector for the motor and wiring.
(2) Connector for wiring and adaptor.
(3) Connector for adaptor wiring and plug wiring.
(4) Connector for the motor and the hand control.
8
ENGLISH
dutchblue.com