Terraillon POP EASY VIEW Manuel D'utilisation page 21

TERRAILLON BODY FAT SCALE – INSTRUCTION MANUAL
For example, the product recognizes 2 users, it will show the 2 user's number for
4 seconds, repeat 2 times. When the LCD blinks, user can press SET to confirm
user no., and then the scale will enter in Fat measurement process. If user does not
choose user profile during recognition, the product will repeat 2 times then back to
the status of displaying the date, Time and temperature.
Timer function
1. Countdown Timer.
Select the mode by pressing the MODE button until the time layout appears.
Use the arrow keys to set your minute, and then press SET to choose
seconds.
Once the time is selected press SET and the timer will start.
When the timer runs out, a buzzer will beep, and the digits will blink
Note: Last timer setting will be kept in memory so next time user will not have to reset it
(except if he wants to set a new timer).
2. Toothbrush Timer.
Select the mode by pressing the MODE button until the tooth-brush appears.
Click set to start the timer. Timer is at 2:00 by default.
The timer counts down from 2 minutes, with the toothbrush moving every 30 seconds, to signify that a different
area of the mouth should be brushed. When the timer runs out, a buzzer will beep and a smiley appears.
3. Shower Timer.
Select the mode by pressing the MODE button until the timer appears.
Click set to start the timer. Timer is at 10:00 by default.
The timer counts down until the user finishes their shower and presses SET. It will count into negative
numbers, so you know how much you exceeded your time.
When the user finishes and stops the timer before the 10
minutes, a smiley appears. Happy if you beat your time, and sad
if you failed.
EN
21