Step 3 - Load The Dryer; Step 4 - Start The Dryer - Haier HLTD600AEW Manuel D'utilisation

STEP 3 - LOAD THE DRYER

1. Load damp garments loosely into the dryer drum.
2. Close the dryer door.
NOTES:
•
Do not pack the dryer full of garments.
•
An appropriate load should be ⅓ to ½ of the drum volume. Allow space for
clothes to tumble freely for uniform and wrinkle-free drying.
•
When you are drying large bulky items, only 2-3 pieces should be loaded at a time
along with a few small and medium-sized garments.
•
For delicate clothes or small loads, adding a couple of towels will help to ensure
that garments are tumbled. This will produce even drying and reduce wrinkles.

STEP 4 - START THE DRYER

1. Turn the dryer on by pressing the POWER BUTTON.
2. Select a dry cycle by rotating the CYCLE SELECTION KNOB.
3. Modify the default settings and options if desired.
4. Press the START/PAUSE BUTTON on the face of the knob to start the dryer.
NOTE:
•
Opening the door will pause the operating cycle. Close the door and press the
START/PAUSE BUTTON to resume.
28