Safety Precautions; Handling Cautions; Accessories - Panasonic TY-FB8HM Mode D'emploi

Safety Precautions

WARNING
•
Never attempt to disassemble or modify this product.
To avoid fi re, shock, or failure.
•
If you sense smoke, an odd odor, or unusual noises while in operation, immediately unplug the display.
Switch off the display and unplug the power cord plug from the supply outlet.
To avoid fi re or shock, do not leave the power of the display turned on.
•
To avoid shock or other problems, do not leave the power cord plug plugged into the supply outlet.
•
Please contact our designated service department for installation or change of this Product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn power of the display off and
unplug the power cord plug from the supply outlet.

Handling Cautions

Do not touch connector contacts with hands directly.
•
To avoid electrostatic damage to internal parts, before handling this product touch a large metallic object such
as a steel cabinet to discharge yourself.
Be sure to use the supplied cable or specifi ed parts for interconnection.
•
To avoid malfunction or failure, do not use parts other than those recommended.

Accessories

Check to make sure that the following accessories are included in the Terminal board package:
Terminal function label ( 1 sheet )
(Affi x this label to the applicable slot of the
rear panel of the display.)
Slot cover
(To install this Terminal Board, remove an
existing dual size Terminal Board and fi t it
into the now blank slot.)
6
IN
( be sure to observe )
Terminal board replacement
Instructions
Screw × 4