Appliance Description; Operation - Beurer HL 70 Mode D'emploi

3. Appliance description

1. Base device
2. Base station
3. Epilator attachment
4. Precision attachment
5. Exfoliation attachment
6. Shaver attachment
7. Unlock button
8. Fixing cap
9. "Epilight"
10. Battery level indicator
11. On/off switch with 2 speed settings
12. Protective cap

4. Operation

• Remove the packaging.
• Check the device, power supply and cables for damage.
• Connect the device to the mains power. The device must be switched off at this time.
• Route the cable safely so that there is no risk of anyone tripping over it.
• Charge the device for 2 hours before the first use.
• If the charger indicator lamps flash slowly this means that the battery is charging. Once the dis-
play is permanently illuminated, the device is fully charged.
• Then you can begin using the device either on battery power or using the mains cable.
• If the charger indicator lamps flash rapidly during battery operation, the battery is empty.
Charge the device by placing it on the station or connecting it to the mains adapter.
• One charge is sufficient for approx. 30 minutes of wireless operation. After that you can conti-
nue to use the device via mains operation.
CAUTION
• For hygiene reasons, you should not share this device with anyone else.
• When switched on, the device should not come into contact with other areas of skin (e.g.
eyelashes, head hair etc.), or with clothes or cords, to avoid injury as well as blockages
or damage to the device.
• Do not use the device on irritated skin, varicose veins, rashes, spots, (hairy) birthmarks
or wounds without consulting a doctor beforehand. The same applies to patients with
weakened immune systems, diabetes, haemophilia and immune insufficiency.
3
1
11
10
9
7
14
8
8
8
2
5
6
12
4
3