TFA easy meteo Manuel D'utilisation page 40

TFA_ANGLAIS 21/04/05
Please take a few moments to discover the various features of controls,
displays and menus.
Under normal operating conditions, the default display will
appear if no control is entered on the keyboard for more than 20
seconds. You will then need to start your operations all over again.
MENU SETTING KEY
This key is used to set up the main unit when starting up your EASY
METEO (See page 46)
This key is also used later on to modify a setting:
E.g.: changing the temperature unit
Synchro Thermo Altitude Baro Sens 1
Move arrows
Validate by
Then use the arrows move to the desired °C or °F position and press
You should then wait a few seconds before the default display reappears.
SENSOR MENU KEY
This key is used to select the sensor, which data you want to display
(sensor 1, 2 or 3 or all three alternately).
Move arrows until you reach the desired setting:
for main unit
for sensor No. 1
for sensor No. 2
for sensor No. 3
To have the main unit display all information of sensors and
main unit, automatically, in sequence and on a continuous basis.
Then press
14:44
or until "thermo" flickers
40
Page 40