Interlogix TruVision NVR 50 Guide Rapide De Démarrage page 7

When using TruNav:
RTSP port: 554
Server/Client software port : 8000
Figure 3: Web browser interface
Live view mode
Live mode is the normal operating mode of
the unit where you watch live pictures from
the cameras.
Regularly used functions in live view can be
quickly accessed by clicking the right-button
of the mouse on the camera image. The
shortcut pop-up toolbar appears. See
Figure 4 below for a description of the
functions available.
Figure 4: The mouse menu for the main
monitor
The list of commands available depends on
which monitor is active; main or spot
(monitor B). See Table 1 below.
TVN 50 Quick Start Guide
Table 1: Mouse menu for monitor A
(main monitor)
Item Name Description
1. Menu Enter the Main menu.
This option is not available
from monitor B.
2. Single Switch to a full-screen view
camera for the selected camera from
the dropdown list.
3. Multi Switch between the different
camera multiview options from the
dropdown list.
4. Previous Displays the previous
screen camera.
5. Next Displays the next camera.
screen
6. Start auto- Turn on sequence mode.
switch The screen automatically
sequences between
cameras.
Go to Menu > Display Mode
Settings > Layout > Dwell
Time to set up.
7. All-day Playback the recorded video
playback of the selected day from the
selected camera. The current
day is selected by default.
8. Monitor B Switch between monitors A
(main) and B (spot).
9. Advanced Enter the advanced video
search search menu.
10. Close Open/close the time bar.
timebar
Configuring the TVN 50
The TVN 50 has an icon-driven menu
structure that allows you to configure the
unit's parameters. Each command icon
displays a screen that lets you edit a group
of settings. Most menus are available only
to system administrators.
Refer to the TVN 50 user manual for
detailed information on configuring the unit.
To access the main menu from live view:

Press the Menu
control or front panel
- Or -
button on the remote
5 : EN