Package Contents; Quick Install; Truvision Nvr 50 Quick Start Guide; Installation Environment - Interlogix TruVision NVR 50 Guide Rapide De Démarrage

Item Name
8. Direction
Enter button
9. PTZ buttons
10. Archive button

Package contents

The TruVision NVR 50 (model TVN 50) is
shipped with the following items:
• IR (infrared) remote control
• Two AAA batteries for the remote
control
• AC power cords (US, Europe, UK)
• USB mouse
• NVR
• CD with software and manuals
•

TruVision NVR 50 Quick Start Guide

• TruVision NVR 50 User Manual (on CD)

Installation environment

Refer to the user manual for detailed
information, but observe these important
requirements:
• Place the unit in a secure location.
• Ensure that the unit is in a well-
ventilated area.
• Do not expose the unit to rain or
moisture.
TVN 50 Quick Start Guide
Description
The DIRECTION buttons are used to navigate between different
fields and items in menus.
In the Playback mode, the left and right button is used to speed up
and slow down recorded video.
In Live View mode, these buttons can be used to cycle through
channels.
In PTZ control mode, it can control the movement of the PTZ camera.
The ENTER button is used to confirm selection in any of the menu
modes.
In single-frame Playback mode, pressing the button will advance the
video by a single frame.
Zoom: Use + and – for digital zoom.
Preset: Call up preprogrammed preset positions.
Tour: Call up preprogrammed shadow tours.
Press once to enter quick archive mode. Press twice to start
archiving. Indicator blinks green when data is being written to backup
device.

Quick install

Recommended steps for setting up the
NVR:
1. Connect all the devices required to the
2. Connect the power cord to the unit and
3. Set up the unit with the required
First-time use
The TVN 50 has an express installation
wizard that lets you easily configure basic
NVR settings when first used. It configures
all cameras simultaneously. The
configuration can then be customized as
required.
By default, the setup wizard will start once
back panel of the TVN 50. See Figure 1
on page 1.
Basic connections:
Connect monitor A to the BNC, VGA or
HDMI output. Connect the mouse to the
USB port in the front panel.
Optional connections:
All the other connections shown are
optional and depend upon installation
requirements.
turn on the power.
settings using the setup wizard.
3 : EN