Preparation For Use; Unpacking And Set Up - Tokai M038 Manuel D'utilisation

 Use suitable power sources - Plug the product into a suitable power source, as described in the
operating instructions or as marked on the product.
 The mains plug is used as the disconnect device, the disconnect device shall remain readily
accessible.
 The disconnect device shall remain readily operable.
 In order to disconnect the apparatus from the mains completely, switch off the outlet and remove the
mains plug completely.
 Any electrical work that is required to install this appliance must be carried out by a qualified
electrician.

Before making any electrical connections, ensure the following :
- do not bend, stretch or pull the supply cable in order to avoid electric shock.
- the supply voltage should be the same as that indicated in the technical specifications and the
appliance rating plate.
 When installed, the power socket must be within easy reach.
 If the sockets outlets in your home are not suitable for the plug supplied with this unit check with a
qualified electrician for replacement.
 The use of multiple connectors or extensions cables are not recommended.

Unpacking and set up

Micro System
 Carefully remove all the components from the carton and remove all packing materials from the
components. Make sure nothing is accidentally discarded with the packing materials.
 Save the carton and the packing materials, if possible, in the unlikely event that the unit ever needs to be
returned for service. Using the original carton and packing material is the only proper way to protect the
unit from shipping damage.
 Remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not
remove any labels located on either the back or button cabinet of the unit.
 Unwind the AC power cord on the back of the main unit and extend it to its full length.
SAFETY INTRUCTIONS

PREPARATION FOR USE

Remote Control (with pre-installed CR2025 battery)
23
User Manual