Nikon SB-30 Manuel D'utilisation page 21

Taking flash pictures in the Manual flash mode
1
1 Set the camera's exposure mode, sync mode, shutter speed, etc.
2 Determine the aperture and flash output level to match the flash shooting distance.
• The guide number varies as shown in the guide number table on page 18, depending on the flash output
level with and without the wide-flash adapter in place.
3 Set the aperture on the camera or lens and the flash output level on the SB-30.
4 Make sure the SB-30's ready-light is on, then shoot.
• In the Manual flash mode, no warning ready-light blinks to indicate that the light may have been insufficient
for correct exposure after shooting.
3 4
E
19