Attachment To The Accessory Shoe - Nikon SB-30 Manuel D'utilisation

Attachment to the accessory shoe

Attaching and detaching the Speedlight
Slide the SB-30's mounting foot 1 into the camera's accessory shoe,
then turn the lock lever 2 in the direction of the arrow to lock the unit.
• When the SB-30 is attached to an accessory shoe not equipped with a
mount pin hole to prevent accidental detachment, take care that the SB-30
does not fall off.
• When detaching the SB-30, set the flash head tilting angle to 75° or 50°,
turn the lock lever 90° in the opposite direction to unlock the unit, then pull
the Speedlight off.
Note on attaching the SB-30 to cameras that have a built-in Speedlight
When the SB-30 is attached to the camera's accessory shoe, do not pop-up the camera's built-in
Speedlight. Otherwise, only one of the Speedlights will fire. However, this is not a malfunction.
E
9