Athena AT. AM Manuel D'installation page 2

Control Panel
Dosage LED in division
(max 1 pulse: 1 stroke)
Dosage LED in division
(max 4 pulses:1 stroke)
Functions selector
Dosage LED in division
(max 10 pulses:1 stroke)
Dosage LED in
multiplication
(1 pulse: n strokes)
two colours LEDs proportional
dosage (4-20 mA) or constant
Regulations can be made by working on the regulation knob on the front of the pump
Electrical connections
B
Alarms
Display
Fixed alarm LED
Fixed alarm LED
Flashing alarm LED
Fixed alarm LED. Function mode off
LED.
EM00136157
ATHENA AT. AM
Cause
End of level alarm
With the flow alarm active, the pump
has not received any flow signals for at
least six consecutive pump strikes.
Memory alarm: the pump receives one
or more impulses during dosage
System FAILURE alarm
problem)
rev 1.1
Flow rate % regulation potentiometer
and pulse regulation in division and
multiplication modes
Level probe, flow rate and
1
Alarm relay
2
3 Pole -
4 Pole +
5
6
Input frequency signal, free contact (water-
meter pulse-sender)
7
8 Dip-switch
B Input level control
Restore the liquid level
Press the SEL button
Press the SEL button
(hardware Check circuit.
memory alarm LED
4-20 mA Input signal
Interruption
1