Cilio 321326 Manuel D'installation page 16

16
4. Make sure the sieve and gasket are properly inserted in the
upper part of the coffee maker. Place the upper part
straight on the lower part, so that they do not jam and turn
both parts tightly together.
5. Place the coffee maker on a suitable heat source and
heat the coffee maker only at a medium level to avoid
overboiling and to protect the coffee maker. The espresso
coffee rises with slightest development of steam into the
upper part. Immediately remove the coffee maker from
the heat source as soon as you hear a soft bubbling sound.
Note: There may be a small amount of water left in the
bottom of the coffee maker.
6. We recommend stirring the espresso coffee with a long
spoon before pouring.
7. Serve your espresso in pre-heated cups.