Before Each Use - Cilio 321326 Manuel D'installation

· Risk of burns! The coffee maker becomes very hot during use. When
having contact with hot surfaces there is a risk of burning yourself. Please
only grasp the cooker by the handle and on the lid knob or if necessary with
an oven glove or oven cloth. Only place the hot coffee maker on heat-
resistant surfaces.
· Remove the coffee maker from the heat source immediately as soon as the
espresso has flowed into the upper part. Never allow the coffee maker to
boil dry. This may damage the structure of the metal and affects the safety
for further use.
· Do not open the lid before the cooking process is finished.
· Do not unscrew the coffee maker until it has been removed from the stove
and has completely cooled down.
· Should your coffee maker be a model where the espresso flows out
sideways through one or two spouts, please ensure that you place one cup
each with sufficient volume under the spout(s).
· Do not use the coffee maker if it or its components are damaged. In case
of repair contact the authorized dealer.
· Use original accessories only.

Before each use

· Thoroughly inspect the coffee maker, including gasket, funnel, sieve and
safety valve for soiling, limescale, wear or damage.
· Test the rate of flow of the riser pipe in the upper part of the coffee maker.
· Model-based: Check the mobility of the pin of the safety valve. Therefor
pull the pin forward from the outside to the resistance and release the pin.
· If you notice any soiling, calcifications, wear or other damages, it is
mandatory for a safe use to resolve them by cleaning, descaling or
replacing damaged parts as required.
14