Maintenance & Storage; Cleaning The Nozzle; Cleaning The Filter - Makita HW1200 Manuel D'instruction

MAINTENANCE &
STORAGE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.

Cleaning the nozzle

Use the cleaner pin to remove dirt from or unclog the
nozzle.
1
► 1. Cleaner pin
NOTICE:
Do not remove dirt or debris forcibly.
This may result in personal injury or damage to the
ejection hole causing deviated jet angles or poor
performance.

Cleaning the filter

Detach the water hose connector and remove dirt and
debris from the inside of the filter.
1
► 1. Water hose connector 2. Filter 3. Sealing ring
2 3
11 ENGLISH
When using the suction hose set (optional accessory),
take the filter out of the filter case and remove dirt and
debris.
1
► 1. Filter 2. Filter case
NOTE: To maintain the optimal performance, clean
the filter periodically.
Storage
Reel the hose and cord. Put the trigger gun and nozzles
in the pockets.
HW1200
HW1300
2