Disposal And Recycling; Cleaning, Maintenance And Ordering Of Spare Parts; Carbon Brushes - Bavaria BMG 135 Kit Mode D'emploi

Anleitung_BMG_135_Kit_SPK1:_
Grinding paper:
For grinding and deburring wood and plastic.
Engraving pins:
For engraving decorations and identification marks in
glass and metal
Polishing felt
For polishing brass, tin, copper, etc. Also for use with
polishing pastes.
Whetstone:
For sharpening tools.
Wire brushes:
For cleaning stone, metal, aluminium, etc.
Sleeves:
Various sizes for mounting different accessory tools.
Cutters:
For cutting plastic, wood and soft metal
Collet chuck key
For mounting accessory tools
9. Cleaning, maintenance and
ordering of spare parts
Always pull out the mains power plug before starting
any cleaning work.
9.1 Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.

9.2 Carbon brushes

In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important! The carbon brushes should not be rep
laced by anyone but a qualified electrician.
19.12.2008 9:24 Uhr Seite 11
9.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
9.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

10. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
GB
11