Features; Specifications - Velleman-Kit K8040 Mode D'emploi

Features & specifications

FEATURES

No compromise high-end design.
Ideal to place next to the speaker (short wires to the speaker).
Auto-power on possibility when input signal is sensed.
Auto-standby function when no input signal is present.
Exclusive, high finish, solid aluminum enclosure.
High quality D-MOS output stage.
Total of 40.000µF power supply capacitors.
Relay–less speaker DC protection.
Real Clipping distortion indication.
Power output level indication with backlight.
Pass through output to drive bi-wired speakers using separate amps.
Double overheating protection with LED indication.
High grade speaker and input connections.
Overload protection.

SPECIFICATIONS*

Inputs :
Input sensitivity for maximum output : .................. 0dBm (0.775Vrms)
Input impedance : ................................................ 15KΩ
Minimum auto switch on voltage : ........................ 5mVrms
Output :
Maximum RMS output power 4Ω : ....................... 90W
Maximum RMS output power 8Ω : ....................... 70W
Dynamic output power in 4Ω : ............................. 125W
Minimum load impedance : .................................. 4Ω
Damping factor / ref. 8ohm 100Hz : ..................... > 1000
Audio specs :
Signal to noise ratio (A-weighted ref. max. out) : . >105dB
Total harmonic distortion : ................................... 0.003% @1KHz ref 1W
Frequency response : .......................................... 9Hz to 120KHz (-3dB) in 50W
Power requirements (depends on version) :
AC power : ........................................................... 115Vac / 230Vac
Consumption : ...................................................... 100W max.
Dimensions : ........................................................ 290x165x68mm (11.4"x6.5"x2.7")
Weight (net) : ....................................................... 3.4Kg (7.5Lbs)
Output graphs
4