Télécharger Imprimer la page

Setup; Setup 1: Connect A Computer Equipped With A Dvi Output Connector (Digital Rgb); Setup 2: Connect A Computer Equipped With An Hd15 Output; Connector (Analog Rgb) - Sony SDM-P232W Mode D'emploi

Masquer les pouces Voir aussi pour SDM-P232W:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23

Setup

Before using your monitor, check that the following items are
included in your carton:
• LCD display
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• Windows Utility/Macintosh Utility Disk
• Warranty card
• This instruction manual
Setup 1: Connect a computer
equipped with a DVI
output connector (digital
RGB)
• Turn off the monitor and computer before connecting
them.
• When connecting the computer to the monitor's HD15
input connector (analog RGB), refer to "Setup 2:
Connect a computer equipped with an HD15 output

connector (analog RGB)."

Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
1 Remove the back cover.
2 Using the supplied DVI-D video signal cable (digital
RGB), connect the computer to the monitor's DVI-D
input connector (digital RGB) for INPUT1 or INPUT2.
to the DVI-D input
connector (digital RGB)
for INPUT1 or INPUT2
to the computer's DVI
output connector
(digital RGB)
Setup 2: Connect a computer
equipped with an HD15
output connector (analog
RGB)
Turn off the monitor and computer before connecting
them.
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
1 Remove the back cover.
DVI-D video signal
cable (digital RGB)
(supplied)
GB
(continued)
7

Publicité

loading