Maintenance And Cleaning - BH FITNESS Bladez Fusion GSII Guide D'utilisation

1. Care has been taken to assure that your bike has been properly adjusted and lubricated at the
factory. It is not recommended that the user attempt service on the internal components; instead
seek service from an authorized service center.
2. From time-to-time the outer surfaces may appear dull or dirty. Following the instructions listed below
will restore and preserve the original finish.
3. Clean the handlebars and seat after each workout with a disinfectant spray, and remove any sweat
from the bike frame.
4. Apply anti-rust to the flywheel every time you clean the machine or at least once a month. Apply a
very light coat of oil in the contact surface of the flywheel with brake to avoid rattling noises.
5. Cleaning metal surfaces may be accomplished by using a soft cotton or terry cloth rag with a light
application of car wax. Do not use aerosol sprays or pump bottles as they may deposit wax on the
console surface.
6. From time-to-time the computer surface may collect dust or finger prints. The use of harsh chemicals
will destroy the protective coating and cause a static build up that will damage the components. This
surface may be cleaned with cleaning products found in most computer supply stores, specially made
for antistatic surfaces. It is strongly recommended that you purchase such a cleaning compound.
7. The safely level of the equipment can only be maintained if it is regularly examined for damage and/
or wear and tear.
8. Care must be taken when lifting or moving the equipment so as not to cause injury.
9. The brake pad is most susceptible to wear. Before exercising inspect the braking system for proper
functionality.
10. Please check if all warning labels are in good condition and legible. If they are worn or damaged
please contact the distributor to order new sticker.
CLEANING:
Wipe sweat off the cycle immediately after each workout and then with a damp cloth. Clean dust
from the cycle using a damp cloth or towel. Do not use solvents. Use a vacuum cleaner to clean
around the cycle. The cycle may be cleaned underneath by laying it on its side. From time to time,
check that all fasteners are properly secured and tightened. Check and tighten up all the parts on
your unit every three months. Use of this machine with worn or weakened parts may cause the user
injury. If you have any doubts about the condition of any part, we recommend that you replace it,
using manufacturer's spare parts. Use of non original spare parts may cause injury or affect the
performance of the machine.
FOR WARRANTY REPAIRS, PLEASE DO NOT TAKE YOUR MACHINE BACK
Register your product warranty online at: www.BHFitnessUSA.com
20
Questions regarding warranty and parts call: 636.634.2217
MAINTENANCE & CLEANING
TO THE RETAIL STORE. CONTACT BH FITNESS FIRST.
BH North America Corporation
620 N. 2nd Street | St. Charles, MO 63301
Phone:636-487-0050; Toll Free: 866.325.2339
Web: www.BHFITNESSUSA.COM
Mon - Fri 8am - 5pm CST
TM