Console Overview; Key Function; Operation Procedures - BH FITNESS Bladez Fusion GSII Guide D'utilisation

Masquer les pouces

Table des Matières

Les langues disponibles

SPECIFICATIONS:

TIME(TMR)

ODOMETER(IF HAVE)

SPEED(SPD)

PULSE"(IF HAVE)

DISTANCE(DST)

CALORIES(CAL)

KEY FUNCTION:

1. MODE: Lets you select a particular function.

2. PAUSE: Press to start or stop the functions.

3. SET: Allows you to choose a target value for TIME ,DISTANCE,CALORIES, ODOMETER &

PULSE.

4. RESET: Resets the value to zero.

OPERATION PROCEDURES:

1. AUTO ON/OFF:

•

The system will turn on when any button is pressed or when it receives an input from the

speed sensor.

The processor turns off automatically when the speed sensor has no signal input or no

•

button has been pressed for more than 4 minutes.

2. HOW TO CHANGE THE SPEED/DISTANCE FUNCTION FROM MILES TO KILOMETERS:

•

After installing the batteries in the console the default distance/speed measurement

is in Miles and is noted by an M on the display in the speed (SPD) and distance (DIST)

functions.

•

To change the distance/speed to Kilometers press the mode button for 3 seconds. The

display will blink and the distance/speed is now Kilometers.

•

Kilometers are noted by a K on the display. To change back to Miles repeat the same

procedure.

3. RESET: THE UNIT CAN BE RESET BY CHANGING THE BATTERIES OR PRESSING THE RESET

BUTTON FOR 3 SECONDS.

4. HOW TO PRESET TIME, DISTANCE, ODOMETER, PULSE & CALORIES:

•

Press the MODE button until the function to be preset is flashing.

•

Press the MODE button once the function stops flashing .

•

Next, choose the value you want to exercise by pressing the SET button.

•

When the speed sensor receives a signal, the monitor will begin to count down.

•

It will beep for 10 seconds to indicate the completion of preset workout, press any button

to stop the beeping.

•

If data is not preset, functions will count up.

Questions regarding warranty and parts call: 636.634.2217