Explanation Of Symbols; Backrest Inclination - Vermeiren D200 30 Mode D'emploi

Storage and use temperature
Storage and use humidity
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / °
1.2 Drawing
(change paragraph 1.3 manual D200)
1.3 Accessories
The following accessories are available for the D200 30°:

Drum brakes (B74)
1.4

Explanation of symbols

Not crash-tested
2 Use
(refer to manual D200 paragraph 2)
2.1

Backrest inclination

L WARNING:
Risk of tipping over – Be aware that the stability decreases when the
backrest is adjusted backwards.
L WARNING:
Risk of injury – Apply the parking brakes before adjusting the
backrest.
L CAUTION:
Chance of pinching – Do not place your fingers, clothes between the
adjustment mechanism.
With the model D200 30° it is possible to set the backrest backwards with a maximum
inclination of 30° (4 different positions: steps 10°). Be sure that the patient sits in the chair
when the attendant shall perform the back adjusting and that the wheelchair does not tip
over.
+ 5 °C
30%
Table 1: Technical specifications D200 30°
(add to manual D200 paragraph 1.4)
(add to manual D200 paragraph 1.6)
(add to manual D200)
Page 2
+ 41 °C
70%
1 = Pushbar
2 = Handgrips
3 = Lever back inclination
4 = Backrest
5 = Armpads
6 = Armrests
7 = Driving wheels (rear
wheels)
8 = Handrims
9 = Tip cap
10 = Brakes
11 = Steering wheels (front
wheels)
12 = Footrests
13 = Seat
14 = Cross
D200 30°
2014-10