Ordering Replacement Parts; Disposal And Recycling; Storage - EINHELL TC-VC 18/20 Li S Traduction Du Mode D'emploi D'origine

Cleaning the foam fi lter (Fig. 2/Item 15)
Clean the foam fi lter (15) with a little soft soap
under running water and allow it to air-dry.
7.5 Maintenance
At regular intervals and before each use, check
that the fi lters in the wet/dry vacuum are securely
fi tted.

7.6 Ordering replacement parts:

Service
1. If your power tool requires service,
contact an authorized Einhell USA dealer
or call the Einhell USA customer service
center at 1-866-EINHELL
(1-866-346-4355). Only identical
replacement parts should be utilized for
repairs. This will ensure that the safety of the
power tool is maintained.
2. If the battery charger cable is damaged, it
must be immediately replaced to avoid a
hazard. Contact the Einhell USA
service center at 1-866-EINHELL
(1-866-346-4355) for assistance.

8. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.

9. Storage

Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
Anl_TC_VC_18_20_Li_S_USA_SPK7.indb 11 Anl_TC_VC_18_20_Li_S_USA_SPK7.indb 11
EN
The reprinting or reproduction by any other
means, in whole or in part, of documentation and
papers accompanying the products is strictly
subject to the express consent of iSC GmbH.
Subject to technical changes
customer
®
- 11 -
16.04.2019 12:48:23 16.04.2019 12:48:23