Avoiding Material Damage; Operating Elements - Bosch MFQ4 Série Manuel D'utilisation

▶ Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶ Never place the appliance on or near hot surfaces.
▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never leave the appliance switched on if the power supply is in-
terrupted. The appliance will automatically start up again follow-
ing the interruption in the power supply.
▶ Process hot food carefully.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
damage material Avoiding

Avoiding material damage

damage material Avoiding ▶ Do not operate the appliance at no-load.
▶ Never use the blender jug in the mi-
crowave or oven.
Overview
Overview
Overview → Fig.
1
Switch
1
Ejector button
2
Release buttons
3
Apertures (with lock) for inserting
4
the tools
Cable clip
5
Self-closing rear aperture
6
„Fine Creamer" beating whisks
7
Kneading hooks
8
1
Lid
9
Plastic blender jug
10
High-speed hand blender
11
Universal cutter
12
1
Depending on the model
2
separate operating instructions
Printed on 100% recycled paper
1
1
1 2
1 2
Avoiding material damage en
Note: If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
elements Operating

Operating elements

elements Operating
Ejector button
For removing the tools.
Note: The Ejector button cannot be actu-
ated unless the switch is in the
Release buttons
For removing the accessories from the rear
aperture.
Switch
Symbol Function
switched off
⁠ lowest speed
⁠ highest speed
Instantaneous switching
⁠
(highest speed) press to
the left and hold in place
Note: When the rear aperture is open, the
selector switch will not function between
levels and ⁠ .
position.
11