Advice To Obtain The Best Results; Package Contents; Description Of The Product; Fitting The Battery - Dogtek NoBark SONIC Guide D'utilisation

3
User's guide
Thank you for choosing this DOGTEK product.

Advice to obtain the best results

The owner's involvement during the first use of the product
is a key factor in obtaining the best results.
Do not leave your dog unattended with the collar on until he is accustomed to wearing
it and you are satisfied that it is working correctly. You should ensure that the settings
(bark detection sensitivity / operating mode) are adjusted correctly for your dog.
Closely monitor your pet during the first few days of use.
When your dog is barking, let the collar operate without interference. Any interference on your
part could be taken as a sign of acknowledgment; consequently the barking would become an
effective mean to attract your attention.
As soon as your dog stops barking, congratulate him (but not excessively) by petting him,
verbally praising him, or giving him a small treat to encourage his good behavior.
Remember that barking can indicate some behavioral issue. This bark control collar will allow
you to minimize excessive barking.
w w w . D O G T E K . c o m

pAckAge contents

- collar equipped with a short bark sensor
- nylon strap
- 3 Volt CR 2450 lithium battery
- magnetic key (magnet)
- long bark sensor
- small plastic screwdriver (use only to adjust collar sensitivity)
- this user's guide

Description of the proDuct

fitting the bAttery

- Remove the screws from the battery cover with a screwdriver.
- Remove the battery cover.
- Insert the 3 Volt CR 2450 lithium battery as indicated under the battery holder (See diagram 2).
- A beep sound is emitted indicating that the battery was properly inserted. If you do not hear any
4