Aero Deluxe AeroBed Mode D'emploi page 4

TROUBLESHOOTING
Very rarely, your Deluxe AeroBed ® may fail to inflate properly. Should this occur,
please use the following check list.
1. If your Deluxe AeroBed doesn't appear to be inflating:
First, make sure the Quick Air Release Valve is closed
and locked securely.
If the valve is open, close it by using 2 thumbs to push
cover firmly into valve. Be careful to avoid pushing valve
cover to the right or left as it snaps into valve opening.
2. If air leakage from the Quick Air Release Valve occurs:
Carefully inspect the soft round gasket on inside of Quick Air Release Valve
cover. Make sure there is no dirt or debris, cuts, nicks or tears to the gasket.
If there is dirt or debris; clean and use. If cut, nicked or torn, call our Customer
Service center or visit our website to order a replacement part.
3. If trouble persists, please phone our Customer Service center for assistance.
U.S. and Canada: 1-888-462-4468
Monday through Friday, 9 AM to 5 PM Central Standard Time
Or visit our website at : www.ThinkAero.com
4
LIMITED WARRANTY
Aero Products International, Inc. warrants to the original purchaser only when the
Deluxe AeroBed ® is used for normal indoor sleeping purposes, that the mattress will
be fully guaranteed against defects in material and workmanship for a period of one
(1) year from the date of purchase, provided further that the Deluxe AeroBed has
been operated according to the provided instructions. (Included in your purchase is
a repair kit with instructions.)
The motor (exclusive of the controller) will be guaranteed to the original purchaser
against defects in materials and workmanship for a period of one (1) year from the
date of purchase provided the motor has been operated according to the
instructions.
Our obligation under this warranty shall be limited to the repair or exchange of any
part or parts which may prove defective under the conditions and during the periods
described above.
Our obligation under this warranty shall not apply if our inspection shows:
A. Any product or part that has been damaged by alteration.
B. Any product or part that has been subject to accident, misuse, abuse or has
been operated contrary to Aero Products International, Inc. instructions for the
product.
All purchasers must obtain an authorization from Aero Products International, Inc.
before returning a defective product. The product should be carefully packaged and
delivered postage or delivery charges prepaid. The customer shall be responsible for
all damages incurred in shipping.
5