User Notes - Tintometer Lovibond Floc-Tester ET 730 Mode D'emploi

User notes

GB
End of work cycle operations
At the end of the work cycle set the stirring speed knob on "0" rpm, the timer knob on
"OFF" and turn off the light of central column .
If the instrument is not used for a long period it's better to disconnect the external power
supply from the electric line .
Maintenance
No routine or extraordinary maintenance is necessary but periodically cleaning of the unit
as described in this manual .
In compliance with the product guarantee law, repairs to our units must be carried out in
our factory, unless previously agreed otherwise with local distributors .
Cleaning
Disconnect the unit from the power supply and use a cloth dampened with a non-flamma-
ble and non-aggressive detergent to clean the unit .
Disposal
The final disposal of the unit or of its components must be carried out in compliance with
the directives and laws in force in the country concerned .
19
Floc-Tester_ET730_5 07/2016