Focal Professional CMS 40 Manuel D'utilisation page 18

CMS SUB
U s e r M a n u a l
18
Audio connections: CMS SUB (fig. J)
Stereo + Sub setup (2.1 or 2.2):
Left IN: this input is intented to receive the signal coming from the left channel of your source (mixing console, or
other...).
Right IN: this input is intented to receive the signal coming from the right channel of your source (mixing console,
or other...).
Left OUT: this output is intended to connect to the left main loudspeaker of your system. The signal supplied by this
output is not internally processed. You have to engage the high pass filter on the CMS monitors to ensure perfect
coupling and to avoid overlapping.
Right OUT: this output is intended to connect to the right main loudspeaker of your system. The signal supplied by
this output is not internally processed. You have to engage the high pass filter on the CMS monitors to ensure perfect
coupling and to avoid overlapping.
Multichannel configuration:
LFE: this input is intended to feed your CMS SUB in a multichannel application (5.1, 5.2, 6.1, ...): this channel is
dedicated to low frequencies only.
Optimal positioning of the CMS SUB may vary depending on the surface, the shape and acoustic properties of the
listening room.
You are advised to try various locations so to choose the one giving the best possible and most level sound balance.
As a rule of thumb the optimal location will often be in a corner of the room.