Maintenance, Cleaning And Storage - DS Produkte 02932 Mode D'emploi

Drill Bit Attachment
Breaking Aids
Glass / Tile Cutter (Small)

Maintenance, Cleaning and Storage

PLEASE NOTE!
■ Before commencing the cleaning, note the safety instructions in the "Safety
Instructions" chapter!
■ Do not lay or place any heavy objects on the device.
■ Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface. Wipe down the device with a soft damp cloth if necessary.
• If necessary, wipe down the used saw blade with a dry, soft cloth.
19
1. Insert a drill bit attachment (11) (see the "Inserting and
Changing the Saw Blade" chapter – "Drill Bit Attachment").
2. Mark the hole which is to be prepunched.
3. Secure the workpiece to prevent it from slipping.
4. Hold the device securely with one hand and place it on the
workpiece.
5. Place the drill bit attachment on the hole which is to be
prepunched and press down the device with force.
The drill bit attachment can also be used to mark a
wood workpiece. To do this, place it on a predrawn
line and drag along it with a little force. This creates a
small groove which is then easier to saw at a subse-
quent point in time.
1. Mark a breaking edge with the glass / tile cutter (small) (4)
(see the "Use" chapter – "Glass / Tile Cutter (Small)").
2. Secure the workpiece which is to be broken to prevent it
from slipping.
3. Hold the handle and place a breaking aid (9) matching the
thickness of the workpiece on the workpiece.
4. Hold the device securely with one hand and press it up-
wards with force.
1. If the glass / tile cutter (small) (4) is to be used, insert the
fi le (1) or the glass / tile cutter (3) so that the bow (6) fi ts
securely.
2. Secure the workpiece to prevent it from slipping.
3. Hold the device securely with one hand and move the
glass / tile cutter evenly with light pressure over the work-
piece.
EN