Inserting And Changing The Saw Blade - DS Produkte 02932 Mode D'emploi

EN

Inserting and Changing the Saw Blade

PLEASE NOTE!
Always use suitable protective gloves to insert / change a saw blade.
■ Only ever use saw blades which are suitable for the material which is to be processed
and the saw.
In addition to the saw blades which are supplied with the device, it is also possible to
use other saw blades available from specialist stockists (150 mm saw blades for mi-
ni-saws / hacksaws /
In general, saw blades with rough teeth are suitable for wood and plastic, and saw blades
with fi ner teeth are suitable for metal.
Universal Saw Blade
Puk saws).
1. Insert the bow (6) into the handle (8).
2. Place one saw blade holder (5) into the bow, the other into
the recess provided for it on the handle and fi x it a little
using the locking screw (7). Do not screw it tight!
3. Insert a universal saw blade (2) into the two saw blade
holders. When you do this, make sure that the saw teeth
are pointing downwards and away from the handle.
The universal saw blades can be inserted into the
saw blade holder at different positions. Depending on
the texture of the workpiece, it is possible to saw from
above or from the side.
4. Fix the universal saw blade with the locking screw.
16