Gallagher MBS1800i Notice D'installation page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Ensure that all mains operated, ancillary equipment connected to the electric animal fence circuit
provides a degree of isola on between the fence circuit and the supply mains equivalent to that provided
by the energizer.
Protec on from the weather shall be provided for the ancillary equipment unless this equipment is
cer fi ed by the manufacturer as being suitable for use outdoors, and is of a type with a minimum degree
of protec on IPX4.
WARNING: Risk of Electric Shock. Do not connect the energizer simultaneously to a fence and to any
other device such as a ca le trainer or a poultry trainer. Otherwise, lightning striking your fence will
be conducted to all other devices.
This energizer complies with interna onal safety regula ons and is manufactured to interna onal
standards. Gallagher reserves the right to make changes without no ce to any product specifi ca on to
improve reliability, func on or design. E & OE.
The author thanks the Interna onal Electrotechnical Commission (IEC) for permission to reproduce Informa on from
its Interna onal Publica on 60335-2-76 ed.2.2 (2013) Annex BB-1. All such extracts are copyright of IEC, Geneva,
Switzerland. All rights reserved. Further informa on on the IEC is available from www.iec.ch. IEC has no responsibility
for the placement and context in which the extracts and contents are reproduced by the author, nor is IEC in any way
responsible for the other content or accuracy therein.
Save these instruc ons
SERVICE OF DOUBLE-INSULATED APPLIANCES
In a double-insulated controller, two systems of insula on are provided instead of grounding. No equipment
grounding means is provided in the supply cord of a double-insulated controller, nor should a means for
equipment grounding be added to the controller. Servicing a double-insulated controller requires extreme
care and knowledge of the system, and should be done only by qualifi ed service personnel. Replacement
parts of a double insulated controller must be iden cal to the parts they replace. A double insulated
controller is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED". The symbol for double
insula on
may also be marked on the appliance.
Important Informa on
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mbs2800i

Table des Matières