Gallagher MBS1800i Notice D'installation page 10

Step 1. Install the Energizer
Energizer must be installed under cover, where it is protected from the
environment. For further installa on op ons, refer to Mul Power Op ons below.
Mount the energizer on a wall and out of reach of children. Install where there is
no risk of the energizer incurring fi re or mechanical damage and if possible away
from heavy electrical equipment e.g. pumps or other items that may cause electrical
interference.
a) Using the template on the back page, drill 2 x 4 mm
(5/32") holes (E & F).
b) Fix the screws provided into the wall leaving the head
of the screw about 3 mm (1/8") out from the wall.
c) Place the energizer over and slide down onto the
moun ng screws.
d) Remove orange terminal cover to expose Fence, Earth
and Reference Earth terminals.
Mul -Power Op ons
8
Gallagher 3E4346 MBS1800i MBS2800i Energizer User Manual
Mains
Powered
a
b
Solar/ Battery
Powered