Troubleshooting - SilverCrest SKC 121 A1 Mode D'emploi

Your local community or municipal authorities can provide information on how to
dispose of the product.

Troubleshooting

Malfunction
The appliance is
not working.
The food is frozen.
The compressor
runs constantly.
The temperature of
the stored foods is
not ideal.
│ GB │ IE │ NI
■ 34
Cause
The plug is not inserted into
a mains power socket.
The appliance is defective.
Temperature control
set to 0.
The set cooling level is too
high.
The door is not properly
closed.
There is a heat source in the
direct vicinity.
You have stored hot
foods in the appliance.
The foods are packed in too
tight so that the cold air is
unable to circulate.
Too much food is being
stored.
The door is not properly
closed or is being opened
too often.
The set cooling level is too
low.
The solution
Connect the plug to the power supply.
Contact the Customer Service depart-
ment.
is Turn the temperature control
higher cooling level.
Reduce the cooling level.
Close the door.
Remove the heat source.
Remove the hot foods and allow
them to cool down before replacing
them in the appliance.
Store the foods so that they are not
too close together.
Do not try to store too much food in
the appliance.
Close the door or make sure that you
do not open it too often as the interior
temperature rises each time.
Select a higher cooling level.
to a
SKC 121 A1