Turn the handle (2) until the
desired torque in the
particular scale (3) N·m or
lbf·ft / lbf·in is identical with
the mark in the reading
glass.
Make a precise
adjustment of the main
scale using the
micrometer scale (4).
Push the locking button
(1) back into the end of
the handle (2). Care must
be taken to ensure that
the locking button (1) is
properly locked into place
and the yellow mark is no
longer visible. Only then is
the torque reliably set.
EN
2
12
2
3
4
1
1