Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. COOL BOX APPLICATION
The cool box is designed to be operated from:
•
a DC on-board power supply from a vehicle, boat or caravan.
•
a DC auxiliary battery
•
an AC power supply
The cool box is intended to be used inside a tent, a car or a house.
CAUTION! Health hazard!
•
Please check if the cooling capacity of the device is suitable for storing the food or medicine you
wish to cool.
3. COOL BOX FUNCTION
The cool box can refrigerate or freeze food products. A fast-acting and efficient cooling
system provides maintenance-free cooling performance with a compressor and control module.
The cool box is designed for mobile use and it can be used in various harsh conditions
and situation.
Function description:
•
3-level battery monitor for protecting the vehicle battery.
•
Display with temperature gauge (switch off automatically at low battery voltage)
•
Temperature adjustment (with two buttons in step of 1°C or 2°C).
4. DISPLAY ELEMENTS AND COOL BOX OPERATION
NOTICE!
•
Before staring your new cool box for the first time, please lay the new cooling device horizontally
for more than 10 hours before starting.
•
Before staring your new cool box for the first time, your should clean it inside and outside with a
damp cloth for hygienic reasons. Please also refer to the chapter "Cleaning and Maintenance".
4.1 Display & control panel:
4.2 Cooler device switch on/off:
•
Switch on: Touch the button "ON/OFF" once lightly by your finger.
•
Switch off: Keep touching the button "ON/OFF" for about 5-7 seconds.
4.3 Cooling temperature setting:
•
Switch on the cool box.
4
•
Select temperature display unit: First touch the button "down" without releasing, at the same time use
your another finger to touch the button "set" without releasing, keep your two fingers touching the two
buttons "set" and "down" for about 10 seconds, there will be flashing "°C" or "°F" appearing in the display
screen, release your two fingers from the two buttons "down" and "set". Then touch the button "up" or
"down" to select the temperature unit Celsius or Fahrenheit. The selected temperature unit will appear
and flash in the display screen for a few seconds, and then the display screen will return to display the
current Temperature automatically.
•
Cooling temperature setting: touch the button "set" once, then touch the "UP +" and "DOWN -" button
to set the cooling temperature you want. The selected temperature number will flash in the display
screen for a few seconds, and then the display screen will return to display the current temperature
automatically.
4.4 Low voltage protection battery monitor setting:
The cool box is equipped with a 3-level battery monitor which protects your vehicle battery
against excessive discharging when the device is connected to the on-board DC supply.
If the cool box is operated when the vehicle ignition is switched off, the cool box switches off
automatically as soon as the supply voltage falls below a set level. The cooler will switch back on
once the battery has been recharged to the restart voltage level.
NOTICE! Danger of damage!
When switched off by the battery monitor, the battery will no longer be fully charged. Avoid
starting repeatedly or operating without longer charging phases. Ensure that the battery is
recharged.
In "H3" level, the battery monitor responds faster than at the level "H1" and "H2".
Monitor Level
H1
12V Switch-off voltage
10.3V
12V Restart voltage
11.1V
24V Switch-off voltage
21.5V
24V Restart voltage
22.7V
When the cool box is supplied by the started battery, select the battery monitor level "H3", if the
cooling device is connected to a supply battery, the battery monitor level "H1" will suffice.
•
Switch on the cooling device.
•
There are 3-level low voltage protection battery monitor setting: H1, H2 and H3.
Touch the button "UP " and "DOWN" at the same time for about five seconds, there will be flashing
"H1" or "H2" or "H3" appear in the display screen, touch the button "UP +" or "DOWN -" to select the
battery monitor level "H1" or "H2" or "H3" to protect your vehicle battery. The selected monitor level
"H1" or "H2" or "H3" will flash in the display screen for a few seconds after setting, the display flashes
several times before it return to the current temperature.
H2
H3
10.8V
11.3V
11.8V
12.6V
22.3V
24.3V
23.7V
25.7V
5
Publicité
Table des Matières
