VelLight LAL1M5C Mode D'emploi page 6

Operation
1. Aim the remote control towards the LED lamp to control the
output.
2. Switch on the LED lamp with the ON button on the remote
control. To switch it off again, press the OFF button.
3. Refer to chapter 5. Overview for more information about
operating the remote control.
7. Cleaning and Maintenance
Wipe the lamp and remote control with a damp cloth occasionally to
keep it looking new. Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the detector.
8. Technical Specifications
electrical data
LED module.................... RGB & warm white SMD LEDs
total nominal power ...................................... < 7.5 W
nominal voltage driver ..............................220-240 V~
power factor ...................................................... 0.53
energy consumption ........................... 7.5 kWh/1000 h
dimmable............................ yes, via IR remote control
light technical data
colour ........................................... RGB & warm white
colour temperature ......................................... 2700 K
beam angle ....................................................... 320°
luminous flux.................................................. 500 lm
colour rendering index ........................................ > 80
starting time ................................................. < 0.5 s
warm-up time (60 %) ....................................... < 1 s
lifespan
nominal life time .......................................... 25.000 h
number of switching cycles .............................. 15.000
V. 01 – 01/12/2015
LAL1M5C
6 ©Velleman nv